USB to dual isolated CAN bus 2.0B/ J1939/ CANopen
CANbus 2.0B backward compatible with 2.0
Support baud rate 100/125/250/500(default)/800/1000K
Support CAN message acceptance filter
Keep configuration after hardware reboot
Up to 6000 CAN messages per second (receive data)
Additional driver to support Linux SocketCAN
Termination resistor enabled/disabled by jumper
Complies with EN61000-4-5 2.5kV Surge protection
Support Listen-only mode
Support SAE J1939/CANopen high layer protocol (Optional)
Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV
HiPOT protection
Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
Supports 3rd mounting hole and USB Pin header for out-ofminicard installation
30μ” golden finger, 3-year warranty
Supports -40 to +85 degrees
mPCIe
USB 2.0
CANbus 2.0B
2 x DB-9
1.62W (3.3V, 490mA)
30(W) x 50.9(L) x 8.35(H) mm
Operation: W/T: -40°C ~ +85°C
Storage: -55°C ~ +95°C
Vibration: 5G @7~2000Hz, Shock: 50G @ 0.5ms
Download driver and API from MyInnodisk website.
Windows: XP(32bit), 7(32/64bit), 8/8.1(32/64bit), 10(32/64bit)
Linux: Kernel 2.6 and above (Native CDC-ACM driver),
Kernel 2.6.38 and above (SocketCAN Driver), 32/64bit
QNX: 6.6
USB to dual isolated CANbus 2.0B Module
USB to dual isolated CANbus J1939 Module
USB to dual isolated CANbus CANopen Module
